1.5 mm aluminium checker plate installation

Aluminium checker plate is very common

Aluminium checker plate, as a very common plate nowadays, can be seen frequently in our family and working environment. For this kind of board, it has high and low markings as the main feature. Now many 1.5 mm aluminium checker plate.
All have a beautiful appearance and look very exquisite. Not only that, it also has a variety of anti-skid and anti-drop functions, and further improved the function, and then won the likes of many businesses. As a cost-effective board, it has the advantage of more contrast. The following aluminum plate manufacturers tell you which installation methods are available during installation and what matters should be paid attention to during installation.

1.5 mm aluminium checker plate installation method

First, the rigid skeleton class:
For this type of 1.5 mm aluminium checker plate, first use an electric drill to drill a hole at the screw location. The hole diameter can be determined according to the screw specifications, and then the patterned aluminum slats are fastened with self-tapping screws. If it is a wooden frame, just use wood screws to screw the patterned aluminum plate on the frame.
Secondly, the screw head is not exposed connection method:
First, fix one end of the patterned aluminum plate with a screw, and the other aluminum strip can extend into the other part to cover the settling. In terms of the facade effect, because there is a 6mm wide gap between the aluminum strips, it will definitely be formed The vertical recessed line angles enrich the facade of the building and break the monotonous feeling.
Then, rubber strip or sealant treatment
Under normal circumstances, the gap between the two patterned aluminum plates is 5-10mm. At this time, we can use some elastic materials such as rubber strips or sealants for processing.
Finally, the closing structure processing
Utilize the processing method of the patterned aluminum plate’s closed structure, first press the horizontal part, and close the end. At the junction of two different materials, elastic sealant is used for processing.
1.5 mm aluminium checker plate

1.5 mm aluminium checker plate installation precautions

1) If you install a 1.5 mm aluminium checker plate, a type of steel frame, you need to use an electric drill to screw the required screws and drill a hole in the relevant position. Then determine the screw specification to be used according to the drilled hole, so that the striped aluminum plate of the device is fastened with screws, and then fixed. If the installation is a wooden frame, then you need to use wooden screws to fix the related striped aluminum plate on the frame.
2) If the operator chooses the relevant connection method where the screw head is not exposed, then it is necessary to fix one end of the patterned aluminum plate with a screw that conforms to the specification. Then add one end of a striped aluminum plate to cover some of the screws that have been fixed, which can form a facade function, and then help us enrich the facades of various buildings and further break The monotonous feeling of traditional buildings.
3) When performing the installation, remember that the gap distance between each patterned aluminum plate and other patterned aluminum plates is specified to be between 5-10MM, and then use standard sealant or other rubber strips that are flexible Do the relevant processing.
4) In the process of the installation, there are questions about the treatment of various dappled aluminum plates on the closing structure, and the topping treatment of the dappled aluminum plates at the time and horizontal part of the installation, and even the two different data transfer points in the installation process. Able to select elastic sealants for a series of proper treatments.

Leave a Reply

Your email address will not be published. Required fields are marked *